Home FAQs Center Help Manual Development Contact Us| Legal Notices | How to Use This Manual | Message Board |
iPOGO V5 Help Manual On-Line |
Group: |
40) Stakeout |
Methodology | |
| Command: | 41 |
| Alpha Alias: | Define SSCtrl |
| Description: | Defines traverse stations for stakeout ties |
| Data Format: | 41 Point# {[Point#] ... } ; |
| Problem: | Define a set of traverse stations to be used with the 42, -42, and 45 commands for printing out stakeout ties. |
| Solution: | 41 121 -123; |
Data Description
| Command | 41 | Defines a point or a series of points for use in commands 42, -42 or 45. |
| Point# | 121 | Point number that defines the traverse station to be used for stakeout. |
| {[Point#] ... } | -123 | Repeating feature of this command. Enter additional point numbers to be defined as the traverse stations of the stakeout.
If you want to define a series of sequential points, enter the first and last points in the series. The last point number must be preceded by a hyphen. Example: 1 -50 would define the range for points 1 through 50, inclusive. |
| End Command | ; | All commands end with ; (semi-colon). |
Example Command File
$ Example data file for 41 (Define SSCtrl) command
$ set initial points
0 121 0 0 ;
1 122 121 -1 56 30 30 66.32
-2 52 23 56 99.50 ;
2 1 121 121 122 40 30 20 35.17 ;
-2 2 122 122 123 95 10 15 29.67
74 10 15 10.21
18 15 14 50.00 ;
$ Setup feature codes with the 15.1 command
$ cmd feature, layer, color, style, thickness
15.1 TL TRAVLINE 3 1 20000 ;
15.1 PL PROPLINE 1 1 20000 ;
15.1 SO STAKEOUT 4 1 20000 ;
$ Turn plot on
91 ;
$ Activate the TL feature code with the 15 command
15 TL ;
100 Traverse Line ;
7,1 121 -123 ;
$ Activate the PL feature code with the 15 command
15 PL ;
100 Property Line ;
7,29 1 -4 ;
$ Turn plot off
-91 ;
$ Define stakeout control using the 41 command
41 121 -123 ;
$ Stakeout points 1 through 4 where
$ located within 60' of a traverse point
$ identified in the 41 command
100 Stakeout points 1 through 4 ;
42 60 1 -4 ;